Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

Rear Shelf without Sun Shade, Passat CC







Rear Shelf without Sun Shade, Passat CC

Removal of sun protection shade is performed when it is in a rolled in state.

Removing

- Remove the seat bench. Refer to => [ Seat Bench, Passat from MY 2006, Passat CC from MY 2009 and CC from MY 2010 ] Seat Bench, Passat from MY 2006, Passat CC from MY 2009 and CC from MY 2010

- Remove side upholstery:

With rear side airbag: => [ Side Upholstery with Side Airbag ] Side Upholstery with Side Airbag

without rear side airbags: => [ Side Upholstery without Side Airbag ] Side Upholstery without Side Airbag

- Remove C-pillar trim. Refer to => [ C-Pillar Trim, Vehicles without Sun Shade, Passat CC from MY 2009 and CC from MY 2010 ] C-Pillar Trim, Vehicles without Sun Shade, Passat CC from MY 2009 and CC from MY 2010

- Fold up the bracket - 3 -, open the cap - 1 -, remove the screw - 2 - (20 Nm) and remove the securing eye - 4 - from the rear shelf.

When installing, make sure that the securing eye anti-twist mechanism is installed in the appropriate opening in the body - arrow -!






- Guide the right and left seat belt - 1 - through the rear shelf - 2 -.






- Remove the rear shelf first upward - arrows A - and then in the drive direction- arrows B - out of the mounts.






Installation

- To install, perform the steps used for removal in reverse order.