Tire Pressure Monitoring Antennas

Tire Pressure Monitoring Antennas

Removing

• The Tire Pressure Monitoring Antenna (R207) is bolted to the left sill under the B-pillar.

- Switch ignition off.

- If it is present, remove the tire pressure monitoring antenna cover cap from the sill.

- Separate connector - 1 -.





- Remover the expanding rivet securing the tire pressure monitoring antenna and remove the tire pressure monitoring antenna - 2 - from the bracket.

Installing

- Insert the tire pressure monitoring antenna - 2 - in the bracket and secure it with an expanding rivet.





- Connect harness connector - 1 -.

- If it is present, install the tire pressure monitoring antenna cover cap on the sill.