Rear Axle Camber, Adjusting

Rear Axle Camber, Adjusting

Special tools, testers and auxiliary items required

• Insert tool 18 (T10179)

• Torque wrench (V.A.G 1332)

- Loosen nut - A - of threaded connection of upper transverse link at subframe.






- Adjust camber by turning hex of eccentric bolt - arrow -.

• The maximum adjustment range is 90° to left or right of center position.

- Tighten nut - A -.

- To do so, use (T10179).






When using (T10179) , tighten nut to 80 Nm.

- After tightening the nut - A -, (Fig. N44-10035 ), check the camber value once again.

Tightening Specifications