Lock Cylinder Cover Cap

Lock Cylinder Cover Cap

Removing

• When removing the lock cylinder cab, do not turn the key or use prying motions.

• Only the driver door is equipped with a lock cylinder.

- Press the key - 2 - slightly - arrow a - into the opening on the lower side of the lock cylinder cap - 1 -.





- Gently remove the door handle - 3 - from the door panel.

- Pull off the lock cylinder cap - 1 -, together with key, lightly at underside from door - arrow b -.

- Slide cover cap upward - arrow c - from lock cylinder.

Installation

- Gently remove the door handle - 2 - from the door panel.





- Place the lock cylinder cap - 1 - gently at an angle from above - arrow a - on the lock cylinder.

- Press the lock cylinder cap - 21 - on to door - arrow b - until cover cap engages with lock cylinder.