Bearing Bracket

Bearing Bracket

• Removing and installing is described only for the right bearing bracket. Removing and installing the left bearing bracket is similar

Removing





- Remove the lock cylinder housing => [ Housing ] Housing

- Remove door handle.

- Remove outer door panel => [ Outer Door Panel ]

- Pull retaining rubber - 4 - upward from guide pin.

- Pull bearing bracket - 1 - in - direction of arrow - with guide pin - 2 - out of mounts - 3 -.

Installing





- Slide bearing bracket - 1 - with guide pin - 2 - into mounts - 3 -.

- Secure retaining rubber - 4 - on guide pin and mounting pin on bearing bracket mount.

Further installation is in reverse order of removal.