Selector Mechanism with Lever, through 02.09

Selector Mechanism with Lever, through 02.09

• Check the cable for ease of movement after installing it.

Removing

- Remove the center console.

- Remove the cable from the transmission. Refer to => [ Selector Lever Cable, through 02.09 ] Service and Repair.

- Remove the exhaust system components underneath the heat shield.
- Remove the heat shield under the vehicle.

- Remove the 4 nuts for the selector mechanism from above.

Tightening specification for the nuts: 8 Nm

Installing

Installation is performed in the reverse sequence.

- Check the cable after installing it. Refer to => [ Selector Lever Cable, Checking ] Testing and Inspection.