Power Supply Panel, Removing and Installing

Power Supply Panel, Removing And Installing

The power supply panel is located above the battery in the left luggage compartment.

Special tools, testers and auxiliary items required







- Torque wrench VAG 1331 (or 5 - 50 Nm equivalent)

Removing:
- Remove battery isolator.







- Remove nuts - 3 -, - 4 - and - 5 - and remove cables from terminals.
- Disconnect electrical connection - 1 -.







- Release connector lock - 1 - in direction of - arrow - and disconnect electrical connection - 2 -.







- Remove screws - arrows - and remove panel - 1 - from vehicle.

Installing:
Install in reverse order of removal, noting the following:
- Torque all fasteners according to value in table.