Brake Light Switch, from 10.05.2005

Brake Light Switch, from 10.05.2005

On vehicles before 10.05.2005, brake light switch was located on brake pedal. Refer to => [ Brake Light Switch, through 10.05.2005 ] .

Removing

- Remove engine cover.

- On some vehicles, intake hose must be removed.

- Disconnect the connector - 1 - from Brake Light Switch (F).





- Remove bolt - 2 - from brake master cylinder.

- Pull the brake light switch - 3 - downward and off from the brake master cylinder and remove it from the retaining tab at the top - 4 -.

Installing

- Installation is performed in the reverse order of removal.

Tightening Specifications