Rear Window Regulator

Rear Door Window


Window Regulator

Removing

- Remove rear door trim..





- Remove the door window. Refer to --> [ Door Window ]. Rear Door Windows

- Drill out the 4 pop rivets - 2 - on the window regulator - 1 -.

- Pry crank mechanism - 3 - out of the three locking tabs - arrows - in assembly carrier.

- Remove window regulator - 1 - from window frame.

Installation

- When installing window regulator - 1 -, make sure that jacketed release - 5 - lies between window frame and unjacketed release - 4 -.





Then, continue in reverse order of removal.

• A function test must be performed before door trim is installed.