Arm/Disarm Switch: Service and Repair

Interior Monitoring and Vehicle Inclination Deactivation Switch, from 12.06

Interior Monitoring Deactivation Switch (E267) and Deactivate Vehicle Inclination Sensor Button (E360), from 12/06, removing and installing

From 12/06 (model year 2007), the "interior monitoring deactivation " and "deactivate vehicle inclination sensor" have been combined into one button with one symbol.

Special tools, testers and auxiliary items required

• Trim removal wedge (VAS 3409)

CAUTION!
When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool (trim removal wedge (VAS 3409), screwdriver) will be positioned, using commercially available adhesive tape.

• To remove the Interior Monitoring Deactivation Switch (E267) and Deactivate Vehicle Inclination Sensor Button (E360), anti-theft warning system must be deactivated.

• The Interior Monitoring Deactivation Switch (E267) and Deactivate Vehicle Inclination Sensor Button (E360) comprise one component.

• Interior Monitoring Deactivation Switch (E267) and Deactivate Vehicle Inclination Sensor Button (E360) are located in B-pillar trim on driver's side.

Removing

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Carefully pry up button - 1 - using Trim Removal Wedge (VAS 3409) or screwdriver.





- Release and disconnect connector - arrow - and remove it from button.





Installing

Install in reverse order of removal.