Removal and Replacement

Windshield And Rear Window Washer System







- Disconnect by pulling apart both halves of coupling.
- Reconnect by pushing both halves of coupling together until felt and heard to engage.







- Disconnect by turning lock ring -1- through 90 degrees -arrow- and then pulling apart both halves of coupling.
- Reconnect by pushing both halves of coupling together and rotating locking ring -1- -arrow- until it engages.







- Disconnect by lifting lock ring -1- approx. 1 mm -arrow- and then pulling apart both halves of coupling.
- Reconnect by pushing both halves of coupling together and clipping locking ring -1- until it engages.