Reverse Gear Shaft Assembly Overview

Reverse Gear Shaft Assembly Overview

• After disassembling, always replace needle bearing in clutch housing and reverse gear shaft support.





1 Clutch housing

2 Needle sleeve

• Pulling out => [ Pulling needle bearing out of clutch housing ] Reverse Gear Shaft

• Pressing in => [ Pressing needle sleeve into clutch housing ] Reverse Gear Shaft

3 Reverse gear drive gear

4 Circlip

• Always replace after removing

5 Shift gear for reverse gear

• Remove circlip before replacing

• Shoulder faces toward reverse gear drive gear

6 Reverse gear shaft

• Removing => [ Transmission ] Transmission.

7 Needle sleeve

• Pressing out => [ Pressing needle bearing out of reverse gear
shaft support ] Reverse Gear Shaft

• Pressing in => [ Pressing needle bearing in reverse gear shaft support ] Reverse Gear Shaft

8 Reverse gear shaft support

• Removing and installing => [ Transmission ] Transmission.