Glove Box Lamp Switch: Service and Repair

Glove Compartment Light Switch E26, Removing And Installing







NOTE:
- The illustration shows Glove Compartment Light Switch E26 -1 - with instrument cluster removed. The instrument panel does not need to be removed in order to remove and install the switch.
- Glove Compartment Light Switch E26 -1 - can be reached starting from foot well and can be undipped.
- The wire to Glove Compartment Light Switch E26 -1 - is long enough to pull the Glove Compartment Light Switch E26 with wire connected into foot well and then to disconnect the harness connector.

Removing:
- Unclip Glove Compartment Light Switch E26 -1 - with connected wire from bracket - A arrows -.
- Pull Glove Compartment Light Switch E26 -1 - downward behind instrument cluster -arrow B - and disconnect connector.

Installing:
Install in reverse order of removal.