Intake Manifold, Assembly Overview

Intake Manifold, Assembly Overview





1 Intake manifold change-over

2 To Evaporative Emission (EVAP) Canister Purge Regulator Valve (N80)

3 Sealing cap

4 Vacuum connection

5 Gasket

6 To brake booster

7 Throttle valve control module (J338)

• Terminals of harness connector are gold-plated

• Adapt to throttle valve control module when replacing Engine Control Module (ECM) "Guided functions".

8 10 Nm

9 Crankcase vent valve

10 Connecting hose

11 Connection pipe

12 10 Nm

13 10 Nm

14 Clamp

15 Connection

• For crankcase ventilation

16 Alignment cone

• Set gasket in place before fastening

17 Alignment pin, 3 Nm

18 10 Nm

• For intake manifold mount

• 7 bolts per side