Fuel Distributor: Service and Repair

Fuel Distributor With Fuel Injectors, Disassembling And Assembling







1. 10 Nm
2. Protective cap
- For bleeder valve
3. Bleeder valve
- Fuel pressure regulator and residual pressure, checking
- Vent fuel supply system
4. Fuel Injectors (-N30- to -N33-, -N83- to -N84-)
- Checking
5. O-ring
- Always replace
- Lightly lubricate O-rings with clean engine oil before installing
6. Retaining clip
- Make sure clip is correctly seated on fuel injector and fuel distributor
7. Connection for supply line
8. Fuel rail
9. Connector
- Black, 2-pin
- Check for secure fitting
10. Wiring harness
- With harness connectors for fuel injectors
- Clipped in at wiring channel