Sealing Flange, Assembly Overview

Sealing flange, assembly overview

Sealing flange, assembly overview:

1 - 100 Nm plus an additional 1/2 turn (180°)
^ Replace
^ Use counter-holder tool T10069 for loosening and tightening
^ Tighten using torque wrench V.A.G 1601

2 - Vibration damper
3 - 10 Nm
4 - Seal
5 - Sealing flange
^ Coat sealing surfaces with sealant AMV 176 501

6 - Cylinder block
7 - Sealing flange
^ Coat sealing surfaces with sealant AMV 176 501

8 - Seal
^ Remove using pulling hook T20143/2
^ PTFE version of oil seal
^ Identification: No inner coil spring
^ Do not additionally oil or grease sealing lip of sealing ring
^ Before installing, remove oil remains from crankshaft journal with a clean cloth

9 - Dual mass flywheel
10 - 60 Nm plus an additional 1/4 turn (90°)
^ Replace
^ To loosen or tighten, use counter-hold T10044 (with 5 mm spacers), or counter-hold T10069.

11 - 25 Nm