VAS 5051, Connecting and Selecting Functions

VAS 5051, Connecting and Selecting Functions

Special tools, testers and auxiliary items required

• Vehicle diagnosis, testing and information system ( VAS 5051)

• Diagnostic cable (VAS 5051/1) or (VAS 5051/3)

CAUTION!
• Test equipment must always be secured on the rear seat during a road test.

• Drivers must NEVER operate these tools while driving.

- Connect diagnostic cable connector ( VAS 5051/1 ) or (VAS 5051/3) to Data Link Connector (DLC).





- Switch on tester - arrow -.





Tester is ready for operation when it displays buttons for its operating modes.

- Switch on ignition.

- Touch Guided Fault Finding on screen.

- Select one after another:

• Brand

• Model

• Model year

• Version

• Engine identification

- Confirm entered data.

• Wait until tester has checked all control modules installed in the vehicle.

- Press Go to button and select "Function/component selection".

- Select "Suspension" on the display.

- Select "Bake system" on the display.

- Select "01-On Board Diagnostic (OBD) capable system..." indicated on the display.

- Select "Anti-lock Brake System (ABS)..." indicated on the display.

- Select "Function" indicated on the display.

• Now all possible functions of Anti-lock Brake System (ABS) installed in vehicle are displayed.

- Select desired function on display.