Oil Supply Line to Turbocharger

Oil Supply Line to Turbocharger

Removing





- Remove the noise insulation.

- Place the (VAS 6208) drip tray beneath.

- Remove air filter housing.

- Remove the union nut - 2 - and banjo bolt - 4 - on the oil filter bracket.

- Unscrew bolt - 6 -.

- Remove union nut - 2 - at turbocharger.

- Unscrew bolt - 9 - from bracket - 7 -.

- Remove nut - 8 - and remove bracket - 7 -.

- Remove oil supply line - 1 -.

Installing





Installation is performed in reverse order. When doing this note the following:

CAUTION!
Installation of the oil supply line must be performed as in the following description.

Tightening specifications => [ Oil Supply Line to Turbocharger Assembly Overview ] Oil Supply Line to Turbocharger Assembly Overview.

- Loosely fasten the bracket - 7 - with the nut - 8 - to the exhaust manifold.

- Hand-tighten the union nut - 2 - and banjo bolt - 4 - to the oil filter bracket.

- Hand-tighten union nut - 2 - to turbocharger.

- Tighten the union nut - 2 - and banjo bolt - 4 - on the oil filter bracket to tightening specification.

- Tighten union nut - 2 - on turbocharger to tightening specification.

- Position the clamp - 5 - on the oil supply line.

- Tighten bolts - 6 - and - 9 - to tightening specification.

- Tighten the nut - 8 - to the tightening specification.