Glove Box Lamp Switch: Service and Repair

Glove Compartment Light Switch E26, Removing And Installing







NOTE:
- For clarity, illustration shows switch -1 - with instrument panel removed. It is not necessary to remove instrument panel in order to remove switch.
- Switch -1 - is accessible from footwell area.
- Wire to switch is long enough to pull switch into footwell with wire and then disconnect electrical connection.

Removing:
- Unclip switch -1 - with wire from bracket - arrows A -.
- Pull switch -1 - downward behind instrument panel - arrow B - and disconnect electrical connection.

Installing:
Install in reverse order of removal.