Engine, Securing to Engine and Transmission Holder VAS 6095

Engine, Securing to Engine and Transmission Holder VAS 6095

Special tools, testers and auxiliary items required

• Shackle (10 - 222 A /12)

Engine is to be secured to Engine and Transmission Holder (VAS 6095) for performing assembly work.

• Also use Shackle (10 - 222 A /12) to prevent damage to the engine when raising.

- After separating engine from transmission, secure torque converter to prevent it from "falling out".

- Install Shackle (10 - 222 A /12) on each of the engine lifting eyes.

- Attach Lifting Tackle (3033) as shown and lift engine from scissor lift table using Shop Crane (VAS 6100).





- Lift engine by shop crane (VAS 6100) far enough so that flywheel center is at height of mounting plate of Engine and Transmission Holder (VAS 6095). Then, install with four universal mounting components at cylinder block as depicted.