Ignition System Components, Assembly Overview

Ignition System Components, Assembly Overview







1. Ignition Coil with Power Output Stage N70, N127, N291, N292, N323, N324
- Remove and install with puller T10095 A.
2. Connector
- Black, 4-pin
- Use assembly too T10118 to pull off.
3. Bracket
- For Knock Sensor (KS) 1 G61 connector
4. 10 Nm
5. Connector
- Black, 3pin
- Sensor contacts and connector contacts gold plated
6. Knock Sensor 1 G61
- Component location: between cyl. 1 and cyl. 3
7. 20 Nm
- Torque setting influences the function of knock sensor
8. Exhaust camshaft adjuster
- Identification: 32A
- With sensor wheel for Camshaft Position (CMP) Sensor 2 G163
- If the camshaft adjuster has been removed, adjust valve timing after installation Valve.
9. Cover
10. Oil seal
- Replace
11. Camshaft position (CMP) sensor 2 G163
- For exhaust camshaft
- Sensor contacts and connector contacts gold plated
12. 10 Nm
13. Connector
- Black, 3pin
- Sensor contacts and connector contacts gold plated
- Mark connector before removing
14. Camshaft Position (CMP) sensor G40
- For intake camshaft
- Sensor contacts and connector contacts gold plated
15. Knock sensor 2 G66
- Component location: between cyl. 4 and cyl. 6
- Sensor contacts and connector contacts gold plated
16. Connector
- Black, 2-pin
- Sensor contacts and connector contacts gold plated
17. Intake-camshaft adjuster
- Identification: 24E
- With sensor wheel for Camshaft Position (CMP) sensor G40
- If the camshaft adjuster has been removed, adjust valve timing after installation.
18. Spark plug, 20 Nm
- Removing and installing with spark plug removal tool 3122B
- Type and electrode gap
19. Control housing
- For camshaft adjustment
- Removing and installing, Camshafts, removing and installing