Parts of Intake Manifold Change-Over, Removing and Installing

Parts Of Intake Manifold Change-over, Removing And Installing







vacuum hose setup

1. Vacuum actuator
2. Compression spring
3. Vacuum hose
- from intake manifold
4. Check-valve
- Installation position: blue side to Y-piece.
5. to Secondary Air Injection (AIR) Solenoid Valve
6. 6 Nm
7. Intake Manifold Change-Over Valve -N156-
8. Y-piece
9. To fuel pressure regulator
10. T-piece
11. 10 Nm
12. Securing plate
13. Rubber grommet
14. Spacer sleeve
15. Vacuum reservoir
- Component location: in left wheel housing
- for intake manifold change-over at full throttle
16. Intake manifold
17. Washer
- conical side toward intake manifold
18. Seal
- replace if damaged
19. Change-over roller
20. Seal
- for change-over roller