Power Window Switches In Front and Rear Passenger's Doors, Removing and Installing

Power Window Switches In Front And Rear Passenger's Doors, Removing And Installing

NOTE: The procedure for removing and installing all power window regulator switches is essentially the same. Removing the Switch for Window Regulator, in passenger's door -E107- is illustrated below.

Removing

CAUTION:
- Switch off all electrical consumers.
- Switch off ignition and remove ignition key.

- Remove applicable door panel
- Disconnect electrical connection.







- Release switch housing -A- by pressing sideways out from locking device in mounting frame -B- and pull out.

Installing:
- Insert switch -A- in the recess in the mounting frame -B- and engage.
- Reconnect electrical connection.
- Remaining installation in reverse order of removal.