Charge Air Cooler, Assembly Overview - II

Charge Air Cooler, Assembly Overview

NOTE:
- Charge air system must be properly sealed.
- Various hose connections of the charge air system are secured by spring-type hose clamps or couplings.
- If necessary, use lubricant (water without additive) to assist assembly. Do not use lubricants containing oil.
- With couplings, follow the installation instructions closely.







1. Charge air cooler
2. Retaining clip
3. O-ring
- Black
- Replace
4. Connecting hose
5. Rubber grommet
6. Bushing
7. 10 Nm
8. O-ring
- Replace if damaged
9. Manifold Absolute Pressure (MAP) sensor -G71- with Intake Air Temperature (IAT) sensor -G72-
10. 3 Nm
11. To Motor for intake flap -V157-
12. Retaining clip
- Check for secure seat
13. Connecting hose
14. Charge air pip
15. Connecting hose
16. O-ring
- Green
- Replace
17. From turbocharger
18. Transverse pipe
19. Connecting hose