Exhaust Gas Recirculation (EGR) System Components, Removing and Installing

Exhaust Gas Recirculation (EGR) System Components, Removing And Installing







1. EGR Vacuum Regulator Solenoid Valve -N18-* with Potentiometer for EGR -G212-
- Before installing, check sealing surfaces on intake manifold for soiling and clean if necessary
- If EGR vacuum solenoid regulator valve with potentiometer for EGR was replaced, a basic setting must be performed.
- Check EGR Vacuum Regulator Solenoid Valve -N18-.
- Check Potentiometer for EGR -G212-.
2. 10 Nm
3. O-ring
- Always replace
4. Motor for intake flap -V157-
5. Intake manifold
6. Gasket
- Always replace
7. Connection tube
- For Exhaust Gas Recirculation (EGR) system
8. 25 Nm
9. Radiator
- For Exhaust Gas Recirculation (EGR) system
10. 10 Nm
11. Exhaust manifold
12. From connecting piece
13. To heater core.