Exhaust Gas Recirculation (EGR) Components, Removing and Installing

Exhaust Gas Recirculation (EGR) Components, Removing And Installing (Vehicles With Engine Code BEW)







1. Bracket
- For bypass-flap
2. 22 Nm
3. 5 Nm
4. Intake pipe
- With Motor for intake flap -V157-*.
5. O-ring
- Always replace
6. EGR Vacuum Regulator Solenoid Valve -N18-* with Potentiometer for EGR -G212-*
- Before installing, check sealing surfaces on intake manifold for soiling and clean if necessary.
- If EGR Vacuum Regulator Solenoid Valve -N18- with Potentiometer for EGR -G212- was replaced, a basic setting must be performed.
- Check EGR Vacuum Regulator Solenoid Valve -N18-.
- Check Potentiometer for EGR -G212-.
7. 10 Nm
8. Gasket
- Always replace
9. Connection tube
10. Radiator
- For Exhaust Gas Recirculation (EGR) system
11. Exhaust manifold
12. Gasket
- Always replace
13. Connection tube
14. Gasket
- Always replace
15. Bypass-flap