Right Rear Tire Pressure Monitoring Transmitter

Right Rear Tire Pressure Monitoring Transmitter

Removing

The right rear tire pressure monitoring transmitter (G434) is installed in the wheel housing liner opposite the direction of travel.

- Switch ignition off.

- Remove wheel housing liner.

- Disconnect connector - 1 -.





- Raise the retainer - arrow - and remove the right rear tire pressure monitoring transmitter (G434) - 2 -.

Installing

- Insert the right rear tire pressure monitoring transmitter (G434) in the bracket.

Make sure the retainer - arrow - engages in front of the right rear tire pressure monitoring transmitter (G434) - 2 -.





- Connect harness connector - 1 -.

- Install wheel housing liner.