Glove Box Lamp Switch: Service and Repair

Glove Compartment Light Switch -E26-, Removing And Installing

NOTE:
- For clarity, illustration shows switch -1- with instrument panel removed. It is not necessary to remove instrument panel in order to remove switch.
- Switch -1- is accessible from footwell area.
- Wire to switch -1- is long enough to pull switch into footwell with wire and then disconnect electrical connection.

Removing







- Unclip switch -1- from bracket --arrow- A-.
- Pull out switch -1- downward behind switch panel --arrow- B- and disconnect electrical connection.

Installing
Install in reverse order of removal.