Arm/Disarm Switch: Service and Repair

Interior Monitoring and Vehicle Inclination Deactivation Switch, through 11.06

Interior Monitoring Deactivation Switch (E267) and Deactivate Vehicle Inclination Sensor Button (E360), through 11/06, removing and installing

CAUTION!
When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool (plastic wedge, screwdriver) will be positioned using commercially available adhesive tape.

• To remove the Interior Monitoring Deactivation Switch (E267) and Deactivate Vehicle Inclination Sensor Button (E360), anti-theft warning system must be deactivated.

• The Interior Monitoring Deactivation Switch (E267) and Deactivate Vehicle Inclination Sensor Button (E360) comprise one component.

• Interior Monitoring Deactivation Switch (E267) and Deactivate Vehicle Inclination Sensor Button (E360) are located in B-pillar trim on driver's side.

Removing

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Carefully pry out Interior Monitoring Deactivation Switch (E267) and Deactivate Vehicle Inclination Sensor Button (E360) using a screwdriver.





- Release and disconnect the connector - arrow -.





Installing

Install in reverse order of removal.