Procedure After An Accident With Belt Pretensioner And/Or Airbag Deployment

Procedure After an Accident with Belt Pretensioner and/or Airbag Deployment

• Each time passenger airbag and/or belt pretensioner on passenger side is deployed, Seat Occupied Recognition Control Module (J706) basic setting must be performed. Perform basic setting with a diagnostic tester that has "Guided Fault Finding".

• If the seat rails and/or seat pan must be replaced after an accident due to deformation, seat occupied recognition must also be replaced with " seat occupied recognition repair kit". Then, Seat Occupied Recognition Control Module (J706) basic setting must be performed. Perform basic setting with a diagnostic tester that has " Guided Fault Finding".

Perform seat occupied recognition basic setting.