Selector Shaft Oil Seal, Replacing

Selector shaft oil seal, replacing, 01V, 5 SPD. A/T (AWD)

Removing

Special tools, testers and auxiliary items required

Pry lever - rmv outside mirror 80-200:

Sealing ring installer 3385:

^ Remove Multi-Function Transmission Range (TR) Switch F125.

Vehicles with V6- and V8-engine
^ Remove left front exhaust system.

Continued for all vehicles





^ Pry off selector lever cable from lever/selector shaft - arrow -.





^ Drive out spring dowel sleeve - 1 - from transmission selector lever - 2 - - arrow - until transmission selector lever is able to be pulled off from selector shaft.





^ Remove O-ring using screwdriver.

Installing
^ Lubricate outer circumference and space between sealing lips with ATF.

Installation position: The open side of the sealing ring faces the transmission.





^ Drive in new sealing ring to stop of sealing ring installer 3385, do not cant while doing this.
^ Push transmission selector lever onto selector shaft and drive in spring pin.
^ Press selector lever cable carefully on lever/selector shaft - 2 - using pliers.





Do not deform selector shaft lever when pressing on or else shifting cannot be precisely adjusted any more.
^ Install Multi-function switch.