Cylinder Head Assembly: Specifications

Cylinder head

Always replace cylinder head bolts.





Fasten cylinder head in four steps in sequence shown as follows:
Step I 40 Nm
Step II 60 Nm
Step III 1/4 turn (90°)
Step IV 1/4 turn (90°)

Checking cylinder head for distortion
Max. permissible distortion 0.1 mm


Camshaft Bearing Cap

Fasten bearing caps 2 and 4, alternating in a diagonal sequence to 8 Nm plus an additional 1/4 turn (90°).
Fasten bearing caps 5, 1 and 3 to 8 Nm plus an additional 1/4 turn (90°).