Charge Air Cooler Components, Removing and Installing

Charge Air Cooler Components, Removing And Installing







NOTE:
- All hose connections are secured with clamps.
- Charge air system must be properly sealed.
- Note assembly markings at hoses and components during installation.

1. Intake hose
2. From air filter
3. From EVAP canister
4. From crankcase ventilation
5. To turbocharger
6. Pressure regulator valve
- For crankcase ventilation
7. Connection hose
- Note assembly markings
8. To throttle valve control module
9. Connection hose
- Charge air cooler/throttle valve control module
- Note assembly markings
10. 10 Nm
11. Charge Air Pressure Sensor -G31-*
- Not for vehicles with engine code AEB
- Replace O-ring when damaged
12. Charge air cooler
13. Air duct
14. Connection hose
- Transverse pipe/charge air cooler
- Note assembly markings
15. from turbocharger
16. Transverse pipe
17. Connection hose
- Exhaust turbocharger/transverse pipe
- Note assembly markings
18. Vacuum line
19. Deceleration shut-off valve
20. Elbow