Combination Valves, Removing and Installing

Combination Valves, Removing And Installing

NOTE: Always replace all seals and sealing rings.

Remove left combination valve
- Unscrew expansion tank for cooling system and set it aside.







- Disconnect vacuum hose -1- from combination valve.
- Remove securing bolts -2- and disconnect connecting line.
- Remove securing bolts -3- and remove combination valve from cylinder head.

Installing
Installation is performed in the reverse order of removal.

Remove right combination valve
- Disconnect connecting line between air filter and intake air scoop.
- Remove intake air scoop from Throttle Valve Control Module.







- Disconnect vacuum hose -1- from combination valve.
- Remove securing bolts -2- and disconnect connecting line.
- Remove securing bolts -3- and remove combination valve from cylinder head.
- If necessary, remove securing bolts -4- for connecting line bracket.

Installing
Installation is performed in the reverse order of removal.