Combination Valve, Removing and Installing

Combi-Valve, Removing And Installing

NOTE: Always replace all seals and sealing rings.

Removing left combination valve
- Unbolt engine coolant reservoir and lay aside.







- Pull off vacuum hose -1-at combi-valve.
- Remove bolts -2- and remove connecting pipe.
- Remove bolts -3- and remove combi-valve from cylinder head.

Installing
Installation is performed in reverse order.

Removing right combination valve
- Remove connecting hose between air filter and intake air scoop
- Remove intake air scoop from throttle valve control module .







- Pull off vacuum hose -1- at combi-valve.
- Remove bolts -2- and remove connecting pipe.
- Remove bolts -3- and remove combi-valve from cylinder head.
- If necessary, remove bolts -4- for connecting pipe bracket.

Installing
Installation is performed in reverse order.