Rear Seat Cover and Cushion For Left Backrest, Removing and Installing

Rear Seat Cover And Cushion For Left Backrest, Removing And Installing

Removing
- Remove headrests.







- Press down backrest cushion below guide - 2 - and disengage retaining tab using screwdriver or drift - 1 -.
- Remove headrest guide - 2 -.







- Remove clamping strip - 2 - from rear panel and fold out rear part - 1 - of cover.







- Remove left pivot pins - 1 -.
- Remove cover beading all around from backrest.







- Pull cover and cushion off backrest and release locking mechanisms - arrows - of button - 1 -.
- Remove button - 1 -.

NOTE: Cover is reinforced in area of button and therefore cannot be pushed over installed button.







- Remove cover - 1 - and cushion - 7 - from rear panel - 5 -.







- Cut through cushion clamps - 8 - (5x).
- Remove cover - 1 - from cushion - 7 -.

Installing
- Installation is performed in the reverse order of removal.

Use new cushion clamps when reinstalling.