Engine and Transmission Mountings, Aligning

Engine and transmission mountings, aligning

WARNING: Before loosening the bolts, the assembly must be supported with support bar 10-222A.





Engine mounting
a = 14.0 mm
b = At least 10.0 mm
Both bolt heads -1- must be in flush with edge -c-.





Transmission mounting
Edges -a- and -b- must be parallel with one another.
c= 18 to 20 mm

Assembly mountings
Tightening torques





Engine mounting
1. Mounting to body [1] 40 Nm plus 90° (1/4 turn)
2. Mounting/bracket to body 25 Nm
3. Mounting to engine mounting 100 Nm
[1] Replace bolts





Transmission mounting
1. Mounting to body [1] 40 Nm plus 90° (1/4 turn)
2. Mounting to body 25 Nm
3. Mounting retransmission console 100 Nm
[1] Replace bolts





Pendulum support
Installation sequence
1. Pendulum support to subframe [1] 20 Nm plus 90° (1/4 turn)
2. Pendulum support to transmission [1] 40 Nm plus 45° (1/8 turn)
3. Pendulum support to transmission [1] 40 Nm plus 45° (1/8 turn)
[1] Replace bolts