Fuel Supply System Components, Servicing

Fuel Supply System Components, Removing And Installing

NOTE:
- Hose connections are secured with screw-type clamps, spring-type clamps or tensioning clamps.
- Always replace tensioning clamps with spring type clamps or screw-type clamps.
- Fuel hoses at engine must only be secured with spring-type clamps. The use of clamping collars or screw clamps is not permitted.







- VAS5024A spring clip installation tool is recommended for installing spring-type clips.

Observe safety precautions.
Observe rules for cleanliness.

Fuel tank with attachments and fuel filter, removing and installing.
Parts of EVAP canister system, removing and installing
Electronic engine power control (E-Gas), checking