Exhaust System Components, Servicing

Exhaust system components, servicing

Note:
^ After working on the exhaust system make sure that the system is not under stress, and that it has sufficient clearance to the bodywork. If necessary, loosen double clamp(s) and align muffler and exhaust pipe so that sufficient clearance is maintained to the bodywork and the support elements/mountings are evenly loaded.
^ Replace self-locking nuts.

Special tools and equipment





^ 3337 Oxygen sensor ring spanner
^ VAG 1331 Torque wrench (5...50 Nm)
^ VAG 1332 Torque wrench (40...200 Nm)