Reading Measuring Value Block (Function 08)

READING MEASURING VALUE BLOCK (FUNCTION 08)

NOTE: To change to another display group proceed as described in image below.





Test conditions
- Control module in "Read measuring value block" function 08
- Vehicle stationary, engine idling
- Engine oil temperature min. 80 °C (176 °F)
- Electrical consumers switched off (radiator coolant fan must not run during the check)
- Air conditioner switched off

Display group overview





- If one of the specifications are not attained, see evaluating display group 000 below.

NOTES:
- Press -> button to end "Read Measuring Value Block"
- After terminating "Read Measuring Value Block", press buttons -0- and -6- to input "End Output" function 06 and press -Q- button to confirm input

Evaluating display group 000

Display field 1 and 2:

Display field 3, 4 and 5:

Display field 6 + 7 and 8:

Display field 9 and 10: