5TH Gear Synchronizer Sleeve/Hub, Installation Position

As of trans. manufacturing date 31 10 1





Pointed teeth of synchro sleeve -1- and collar -2- of hub point toward transmission housing

5th Gear, adjusting

As of trans. manufacturing date 31 10 1





- engage 5th gear. Loosen bolt -1-. Push synchro sleeve and shift fork in direction of arrow and tighten bolt -1-

^ 25 N-m (18 ft.lb.)

- verify adjustment
^ gap between synchro sleeve and gear must not be more than 0.2 mm

- measure with feeler gauge

- repeat adjustment if necessary

- disengage 5th gear. Sleeve must now be in neutral position. Synchro ring must be free.