Fuel Pump Reservoir, Replacing, Disassembling/Assembling

FUEL PUMP RESERVOIR, REPLACING, DISASSEMBLING/ASSEMBLING





1 20 Nm (15 ft lb)
2 Plugs
3 Adaptor
4 Check valve
- 20 Nm (15 ft lb)
5 Retaining ring
6 Fuel pump
- when installing, lug must lit into recess in the retaining
7 O-ring
- coat with fuel before installing
8 Strainer
9 Supply to fuel rail
1O 20 Nm (18 ft lb)
11 Fuel filter
- install with arrow pointing in direction of flow
12 Bracket
13 Bonded rubber mounting
14 10 Nm (7 ft lb)
15 Spring clip
16 Return to fuel tank
17 Supply from fuel pump
18 Return from fuel rall
19 Accumulator
20 Pump reservoir
21 25 Nm (18 ft lb)

Fig. 1:

Installed position of fuel gauge sending unit

Mark on sender must align with mark on fuel tank.

Fig. 2:

Fuel tank vent arrangement for the wagon