Vehicles Built After: 9-91

1- Y piece
2- Vent line
3- Harness connector
- grey
4- Solenoid valve (N 80)
- grey
- when the ignition is switched often, the valve must be open in the direction of the arrow
- when the engine is warm the valve is activated (pulsed) by the Engine Control Module
5- Retaining ring
6- Solenoid valve II (N 115)
- black
- must open when the ignition is switched on
7- Harness Connector
- black
8- Throttle body
9- Mounting bracket
- mounted on Mass Air Flow sensor
10- 10 Nm (7ft lb)
11- Cap
12- Carbon canister
- mounted in right from wheel house