Digifant II

Throttle Cable:

1. Have a helper slowly push the accelerator pedal down to the full-throttle position while watching throttle valve movement on the engine.
2. With the accelerator pedal fully depressed, the throttle valve should barely reach the full-throttle stop on the housing, leaving a clearence of:

0.04 in. (1 mm)

3. If full throttle forces the throttle valve against the stop, the stress on the cable will cause it to stretch and perhaps fail.
4. If full throttle does not open the throttle valve to proper position, loss of power will result.
5. If the Throttle Cable is not within the above specifications, refer to ADJUSTMENT PROCEDURES.