Parts Required

Hardening of adhesive sealing compound
^ vehicle must stand on an even surface, for one hour at a room temperature of at least 10~C (50~F) and a relative humidity of 56-70% after replacing windshield
^ keeping the sealed bonded area wet promotes hardening process


CAUTION
When using any cleaning agent, follow all cautions and warnings listed on the containers.

Excess bonding/sealing compound, removing

^ clean painted areas with dry cloth
^ remove excess adhesive sealing compound using cleaning solvent D 002 000 10 or equivalent
^ to clean plastic trim, let adhesive sealing compound harden approximately one hour, then pull or scrape off excess with plastic wedge


CAUTION
While adhesive sealant is hardening, avoid putting pressure on glass from the inside of the car when cleaning around glass.