Removing and Installing Sunroof

To remove:





1. Open the sunroof halfway. Use a wooden or plastic wedge to pry the front edge of the trim panel from the sunroof. Pry as close as possible to each of the five clips (arrows) that hold trim panel to sunroof. Remove the clips and push the panel back into the roof.





2. Close the sunroof and remove the Phillips head screws (arrows) from the left and right front guides (A) as shown.





3. At the rear guides, unhook the left and right leaf springs (A) and swing them inward as indicated (arrow).





4. Remove the screws (arrows) from the rear guides, then slide the support plate (A) inwards and remove it. Remove the sunroof through the top of the car.





Installation is the reverse of removal. If the interior trim panel was removed from the vehicle, install it into the roof and push it back before installing the sunroof. When the rear guides are installed, align them (broken line) as shown. Adjust the sunroof before attaching the trim panel. Adjustments