Checking End Gap
Piston Rings, Checking End Gap
Insert ring squarely into cylinder until it is approximately 15 mm from edge of cylinder.
New:
- compression ring 0.30-0.45 mm
- oil scraper ring 0.25-0.45 mm
Wear Limit:
- 1.0 mm
Piston Rings, Checking End Gap
Insert ring squarely into cylinder until it is approximately 15 mm from edge of cylinder.
New:
- compression ring 0.30-0.45 mm
- oil scraper ring 0.25-0.45 mm
Wear Limit:
- 1.0 mm