Intake Air Duct: Service and Repair
AIR HOSEOVERHAUL
IMPORTANT POINTS - INSTALLATION
1. INSTALL THE AIR HOSE
1. Location of the rotation direction of the intake pipe and the air hose should match emboss mark as shown in the figure.
2. Tighten the clamp.
Tightening Torque:4.5-5.5 N.m {0.46-0.56 kgf.m, 3.3-4.1 ft.lbf}
2. INSTALL THE AIR HOSE (INTER COOLER)
1. Install the air hose against the stopper as shown in the figure.
2. Match the white mark of the air hose and match mark (stopper) of the intercooler.
3. Tighten the clamp at the white paint portion as shown in the figure.
Tightening Torque:5.4-6.6 N.m {0.55-0.67 kgf.m, 4.0-4.9 ft.lbf}