Reassembly

REASSEMBLY

To reassemble, reverse the order of the above removal procedures. Observe the following:

NOTE:
- Clean the mating surfaces of the nozzle and nozzle holder and the retaining nut in clean diesel fuel before installation.
- Use new gaskets.







Key point of reassembly

(2) Retaining nut
Install the retaining nut with the width-across-flat areas of the nozzle holder placed in a vise.
T : 29 - 39 Nm {3.0 - 4.0 kgfm, 22 - 29 ft-lbf}