Part 5

U341E AUTOMATIC TRANSMISSION / TRANSAXLE: AUTOMATIC TRANSAXLE UNIT: DISASSEMBLY; 2013 MY Corolla [07/2012 -]

87. REMOVE BEARING LOCK PLATE

(a) Remove the bolt and the bearing lock plate.





88. REMOVE DIFFERENTIAL GEAR LUBE APPLY TUBE

(a) Remove the differential gear lube apply tube from the transaxle housing.





89. REMOVE FRONT DRIVE PINION FRONT TAPERED ROLLER BEARING

(a) Using SST, remove the front drive pinion front tapered roller bearing from the transaxle housing.





SST : 09308-10010

90. REMOVE FRONT DRIVE PINION REAR TAPERED ROLLER BEARING

(a) Using SST, remove the front drive pinion rear tapered roller bearing from the transaxle case.





SST : 09612-65014

09612-01040

(b) Remove the No. 1 transaxle case plate from the transaxle case.

91. REMOVE COUNTER DRIVE GEAR BEARING LH

(a) Remove the counter drive gear bearing inner race LH and angular ball from the transaxle case.

(b) Using SST, remove the counter drive gear bearing outer race LH from the transaxle case.





SST : 09308-00010

92. REMOVE COUNTER DRIVE GEAR BEARING RH

(a) Remove the counter drive gear bearing RH from the transaxle case.

(b) Using SST, remove the counter drive gear bearing outer race RH from the transaxle case.





SST : 09308-00010

93. REMOVE COUNTER DRIVE GEAR HOLE SNAP RING

(a) Using a screwdriver, remove the counter drive gear hole snap ring from the transaxle case.





94. REMOVE MANUAL VALVE LEVER SHAFT OIL SEAL

(a) Using a screwdriver, remove the manual valve lever shaft oil seal from the transaxle case.





95. REMOVE NO. 2 TRANSAXLE CASE OIL SEAL

(a) Using SST and a hammer, remove the No. 2 transaxle case oil seal from the transaxle case.





SST : 09950-60010

09951-00550

SST : 09950-70010

09951-07100

96. REMOVE NO. 1 TRANSAXLE CASE OIL SEAL

(a) Using SST and a hammer, remove the No. 1 transaxle case oil seal from the transaxle housing.





SST : 09950-60010

09951-00530

SST : 09950-70010

09951-07100